elZinc® 3d panels

Main features

By combining perforation technology with pressing processes it is possible to create screens with a 3d structure. This interacts with ambient light creating shadows and reflections that introduce a whole new and striking visual layer to the finished façade.

The two designs use 5 different fixed sizes of perforations (round in one design, square in the other) and can be set in 4 different distributions to give varying densities of perforations. These varying densities can be mixed to give smooth transistions from areas of more to less perforation. If required, the preforation layout can be completely customised – consult elZinc for more details.

Our different models.

Rounded 3D design

Rounded 3D design plays with round perforations on a surface with 3d spherical indentations. The indentations alternate positive and negative across the panels in a uniform manner which is fixed at a different pitch to the hole centres. Thus the holes are never in the same position on the indentations, creating an interestingly changing interaction over the surface.

Square 3D design

Square 3D design plays with square perforations on a surface with square indentations. The indentations alternate positive and negative across the panel in a uniform manor which is fixed. The holes are 5 different fixed sizes and can be set in 4 different distributions to give varying densities of perforations, from a free area of 35% to 7%.

Installation ideas

Direct fixed perforated panels - hidden fixings

Can be installed horizontally or vertically.

The perimeters are left free of perforation to create a frame around each panel.

Note: any repetition of openings is due to the drawing construction and is not perceivable in the product.

Direct fixed perforated panels - hidden fixings

Can be installed horizontally or vertically.

The perimeters are left free of perforation to create a ‘frame’ around each panel.

Note: any repetition of openings is due to the drawing construction and is not perceivable in the product

Delivery Formats

The above designs are available in the following formats

Finishes
The full range of elZinc® finishes is available in all of the patterns.

Unperforated edges
Fixed

Other information
The material is supplied with protective foil on one side.

FormatWidth (mm)Length (mm)Thickness (mm)
Rounded 3D10001000 and 20001,00 or 1,50mm on request
Square 3D10001000 and 2000

Finishes

elZinc Rainbow®

elZinc Alkimi®