Delivery programme

Zinc coils and sheets formats and dimensions

  elZinc Alkimi : elZinc® Natural/ elZinc Slate®/elZinc Graphite®/elZinc Crystal®/elZinc Oliva®/elZinc Lava®
1 coil per pallet 6 small coils per pallet Sheet (1000 kg* pallet)
2000 x 1000 mm3000 x 1000 mm
Thickness mm Width mm Aprox. length m Theorical weight kg Approx. length m Theorical weight kg Weight*/ Sheet kg Sheets / Pallet Weight* / Sheet kg Sheets / Pallet
0,7500428100031100
0,7650397100040100
0,71000331100034100
0,7500296100030101
0,765019810002010110,08
0,8100034710003510110215,1266
0,8500289100029100
0,8650259100026100
0.810001741000179811,528917,2858
1500277100028101
165023110002399
1100013810001410114,406921,6046

*Theorical weight

elZinc Alkimi® sheets and coils are fitted with a protective film by default (except for Natural Zinc) which protects the surface from staining and discolouration during transport, handling and installation. This protection should be removed once the material is installed, or when it is no longer needed. The correct performance of the film cannot be guaranteed if it is removed more than 8 months after the shipment of elZinc plus a maximum of 2 months after installation. When removing the film, remember that in the case of Natural (and possibly in the elZinc Alkimi range, although much less so) a difference will be noticed between the protected and unprotected area until the natural evolution of the surface matches its appearance

Coils inner diameter: Coil weight ≥250 kg : 508mm

Other dimensions and thicknesses are available upon request.

   elZinc Rainbow®
1 coil per pallet 6 small coils per pallet 2000×1000 mm sheets
Palet de 200 kg*Palet de 500 kg*
Thickness mm Width mm Aprox. length m Theorical weight kg Approx. length m Theorical weight kg Weight* / Sheet kg Sheet nº/ Pallet Weight* / sheet kg Sheet nº / Pallet
0,7500397100040100
0,7600331100034100
0,7670296100030101
0,7100019810002010110,082010,0850
0,8500347100035101
0,8600289100029100
0,8670259100026100
0,810001741000179811,521711,5243
1500277100028101
165023110002398
1670207100021101
1100013810001410114,401414,4035
*Theorical weight

*Theorical weight

elZinc Rainbow® sheets and coils are fitted with a protective film by default which protects the surface from staining and discolouration during transport, handling and installation. This protection should be removed once the material is installed, or when it is no longer needed.
The correct performance of the film cannot be guaranteed if it is removed more than 8 months after shipment of elZinc plus a maximum of 2 months after installation.

Coils inner diameter: Coil weight <250 kg: 300mm /Coil weight≥250 kg : 508mm

Other dimensions and thicknesses are available upon request.

Recommendations

elZinc® is one of the most hard-wearing metals used in the construction sector. In order to preserve its qualities and ensure it maintains its principle characteristic – its high resistance to corrosion- it is important to bear in mind the recommendations  in our technical manuals “Handling storage and Transport”, and the  “Installation guide”.

The following are the basic rules which must be followed in each stage of the process.

INSTALLATION:

During its placement it is absolutely necessary to follow these guidelines:

  • Suitability: Make sure that the zinc is compatible with the materials it will be in contact with.
  • Ventilation: To avoid risks from condensation, the material covering the zinc must be suitably ventilated.
  • Expansion: This must be borne in mind during installation to ensure airtightness.

UNLOADING AND TRANSPORT ON SITE:

elZinc’s material must be transported and unloaded on a stable base in order to avoid possible knocks and deformations.

STORAGE:

elZinc´s products must be protected from bad weather and they should be stored in:

  • Dry, closed and well ventilated places.
  • Places that protect them from possible contamination by products or elements used or produced during the work (cement dust, dust from plaster…)
  • Avoid storing elZinc products in direct contact with the ground. The minimum recommended separation height is 10 cm.

TRANSPORT AND MAINTENANCE:

elZinc’s products must be:

  • Protected from damp and bad weather
  • Transported using suitable pallets which have been correctly stored.
  • Transported in closed vehicles.